Specialized Copper Nickel 70/30 Flanges Manufacturer, ASTM B151 Cupro Nickel 70/30 Flanges.
Marcel Piping Projects Supply PVT LTD offers Copper Nickel 70/ 30 Pipe Flanges, where we check these products on predefined quality parameters to insure their disfigurement free design. Cu pro Nickel 70/ 30 Slip On Flanges (UNS C71500) are used in areas where high temperatures and pressures, combined with high rapidity and turbulence are serious problems. Cu pro Nickel 70/ 30 Threaded Flanges have good strengths and durability, resistance to bio fouling, readily weldable, and fabricated. Cu-pro Nickel 70/ 30 Flanges are frequently used in Welding Backing Ring, Boiler Parts, Weld Wire, Flexible Metal Hose, Condensers, Propeller Sleeves, Heat Exchanger Components. 927 Degree C and 1038 Degree C Temperatures are suitable for Cu pro Nickel 70/ 30 Flanges. Meanwhile, Cu-pro Nickel 70/ 30 Socket Weld Flanges are also being offered in different sizes, and shapes to our valuable clients. The product separation depends on the leading completion of Cu pro Nickel 70/ 30 Lap Joint Flanges (C71500) with least purr at the edge. The offered Cu pro Nickel 70/ 30 Ring Joint Type Flanges is created using the finest quality crude material and the most exceptional outfit under the supervision of experienced experts. These Cu-pro Nickel 70/ 30 Flanges are used in Distiller Tubes, Condenser Plates, Evaporator Tubes, Pump Impellers, Flexible Metal Hose, and Welding Backing Rings.
We are leading Stockists and Suppliers of ASTM B151 Cupro Nickel 70/30 Flanges in USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya.
Copper Nickel 70/30 Flanges Manufacturer in Mumbai, India
Copper Nickel 70/30 Flanges Supplier in Mumbai, India
We are ISO Certified Manufacturer and Stockist of ASME SB151 Cupro Nickel 70/30 Flanges, Table D & Table E Copper 70/30 Blind Flange, Series A & B Copper Nickel 70/30 Flange, ASTM B151 Copper 70/30 Companion Flange, JIS Copper 70/30 Stub End Flange, PN10 PN16 Copper 70/30 Grooved Flange Pressure Rating, ASME B16.24 Copper 70/30 Slip On Flange at Reasonable Price.
- Copper Nickel 70/30 Flanges Standard Specifications
- Copper Nickel 70/30 Flanges Grades
- Copper Nickel 70/30 Flanges Standards
- Copper Nickel 70/30 Flange Equivalent Grades
- Copper Nickel 70/30 Flanges Chemical Composition
- Copper Nickel 70/30 Flanges Mechanical Properties
- ANSI B16.5 Copper Nickel 70/30 Flange Weight Chart
- Copper Nickel 70/30 Flange Dimensional Tolerances
- Class 150 Copper Alloy 70/30 Flanges Dimensions
- Class 300 Copper Alloy 70/30 Flanges Dimensions
- How To Order Cupro Nickel 70/30 Flanges?
- ASME SB151 Copper Nickel 70/30 Flanges Industries and Applications
- ASTM B151 Copper Nickel 70/30 Flanges Supply and Export Network
- Copper Nickel 70/30 Flange Types and Prices
We are Leading Exporter and Supplier of ASTM B151 Cu-Ni 70/30 Lap Joint Flange, UNS C71500 Class 150 Flanges Raised Face, WERKSTOFF NR. 2.0882 Reducing Flange, Grade 70/30 Threaded Flange, MSS SP-44 Copper Nickel 70/30 Socket Weld Flange, CuNi 70/30 Tongue and Groove Flange, Alloy 70/30 Weld Neck Flange, Gr. 70/30 Spectacle Blind Flange Flat Face, Copper Alloy 70/30 Nipoflange, 70/30 Copper Nickel Weldoflange, Class 300#, 600#, 900#, 1500#, 2500# Copper Nickel 70/30 Flanges Dimensions.
Copper Nickel 70/30 Flange Standard Specifications
ASTM B151 Copper Nickel 70/30 Flange Specification Chart
| Product Name | Copper Nickel 70/30 Flanges |
|---|---|
| Size Range | 1/2″ (15 NB) to 48″ (1200NB) |
| Class / Pressure Rating | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standards / Dimensions | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605 |
| Flange Face Types / Connection Type | Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G) |
| Dimensions | ANSI B16.5, ANSI B16.47 Series A & B, ASA, API-605, MSS SP44, AWWA, Custom Drawings |
| Custom Design | As per your drawing | AS, BS, ANSI, DIN, JIS | Equal and Reducing Configurations |
| Material Test Certificates (MTC) | As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103 |
| Test Certificates | 100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc |
| Tests | Hydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector |
| Equipment / Machines | Press machine, Pushing Machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc. |
| Coating | Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
| Origin | Indian / USA / Japan / West Europe / Korean |
| Applications/Usage | Offshore, Oil Field, Shipbuilding, Water System, Natural Gas, Pipe Projects, Electric Power, etc. |
| Top Export Network | USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya. |
Cupro Nickel 70/30 Flanges Available Grades
ASTM B151 Cupro Nickel 70/30 Flange Grades
Cupro Nickel 70/30 Flange Standards
ASTM B151 Copper Nickel 70/30 Flange Standard Dimensions
Copper Nickel 70/30 Flange International Standards
ASTM B151 Copper Nickel 70/30 Flanges Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Cupro Nickel 70/30 | 2.0882 | C71500 |
Copper Nickel 70/30 Flanges Chemical Composition
ASTM B151 Copper Nickel 70/30 Flanges Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cupro Nickel 70/30 | 65 min | 1.0 max | 0.05 max | 29-33 max | 0.4-1.0 max | 1 max |
Copper Nickel 70/30 Flanges Mechanical Properties
ASTM B151 Copper Nickel 70/30 Flanges Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Cupro Nickel 70/30 Flange Weight Chart
Flange Weights By Pressure Class And Size
Weights are in pounds and will vary by different wall thicknesses. 1 inch = 25.44 mm. 1 mm = 0.03937 inches, 1 lb/ft^2 = 47.88 Pa, 1 psi = 6.8948 Pa, x°F = (5/9)(x-32)°C, 1 pound = 0.45359 Kg, 1 Kg = 2.20462 pounds, 1 Pa = 0.020885 lb/ft^2, 1 Pa = 0.00014504 psi, x°C = (9/5)x + 32°F.
| Flange Weights by Pressure Class and Size | ||||||||||||||||||
| Pipe Size | 150 # | 300 # | 600 # | 900 # | 1500 # | 2500 # | ||||||||||||
| WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | |
| 1/2″ | 2 | 1 | 1 | 2 | 1 | 1 | 2 | 2 | 2 | SEE 1500 # WEIGHTS | 5 | 4 | 4 | 7 | 7 | 7 | ||
| 3/4″ | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 3 | 3 | SEE 1500 # WEIGHTS | 6 | 5 | 6 | 8 | 8 | 8 | ||
| 1″ | 3 | 2 | 2 | 4 | 3 | 3 | 4 | 4 | 4 | SEE 1500 # WEIGHTS | 9 | 8 | 8 | 12 | 11 | 11 | ||
| 1 1/2″ | 4 | 3 | 3 | 7 | 6 | 6 | 8 | 7 | 8 | SEE 1500 # WEIGHTS | 13 | 12 | 13 | 25 | 22 | 23 | ||
| 2″ | 6 | 5 | 5 | 9 | 7 | 8 | 12 | 9 | 10 | SEE 1500 # WEIGHTS | 25 | 25 | 25 | 42 | 37 | 39 | ||
| 2 1/2″ | 8 | 7 | 7 | 12 | 10 | 12 | 18 | 13 | 15 | SEE 1500 # WEIGHTS | 36 | 36 | 35 | 52 | 55 | 56 | ||
| 3″ | 10 | 8 | 9 | 15 | 13 | 16 | 23 | 16 | 20 | 31 | 26 | 29 | 48 | 48 | 48 | 94 | 83 | 86 |
| 4″ | 15 | 13 | 17 | 25 | 22 | 27 | 42 | 37 | 41 | 53 | 53 | 54 | 73 | 73 | 73 | 145 | 125 | 130 |
| 5″ | 19 | 15 | 20 | 32 | 28 | 35 | 68 | 63 | 68 | 86 | 83 | 87 | 130 | 130 | 140 | 245 | 210 | 225 |
| 6″ | 24 | 19 | 26 | 42 | 39 | 50 | 81 | 80 | 86 | 110 | 110 | 115 | 165 | 165 | 160 | 380 | 325 | 345 |
| 8″ | 39 | 30 | 45 | 67 | 58 | 81 | 120 | 115 | 140 | 175 | 170 | 200 | 275 | 260 | 300 | 580 | 485 | 530 |
| 10″ | 52 | 43 | 70 | 91 | 81 | 124 | 190 | 170 | 230 | 260 | 245 | 290 | 455 | 435 | 510 | 1075 | 930 | 1025 |
| 12″ | 80 | 64 | 110 | 140 | 115 | 185 | 225 | 200 | 295 | 325 | 325 | 415 | 690 | 580 | 690 | 1525 | 1100 | 1300 |
| 14″ | 110 | 90 | 140 | 180 | 165 | 250 | 280 | 230 | 355 | 400 | 400 | 520 | 940 | NA | 975 | NA | NA | NA |
| 16″ | 140 | 98 | 180 | 250 | 190 | 295 | 390 | 330 | 495 | 495 | 425 | 600 | 1250 | NA | 1300 | NA | NA | NA |
| 18″ | 150 | 130 | 220 | 320 | 250 | 395 | 475 | 400 | 630 | 680 | 600 | 850 | 1625 | NA | 1750 | NA | NA | NA |
| 20″ | 180 | 165 | 285 | 400 | 315 | 505 | 590 | 510 | 810 | 830 | 730 | 1075 | 2050 | NA | 2225 | NA | NA | NA |
| 22″ | 225 | 185 | 355 | 465 | 370 | 640 | 720 | 590 | 1000 | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| 24″ | 260 | 220 | 430 | 580 | 475 | 790 | 830 | 730 | 1250 | 1500 | 1400 | 2025 | 3325 | NA | 3625 | NA | NA | NA |
Copper Nickel 70/30 Flange Dimensional Tolerances
Tolerance of Welding Neck Flanges
| Outside Diameter | When O.D. is 24″ or less | ±1.6mm﹡ |
| Inside Diameter | 10″ and smaller | ±0.8mm |
| 12″ thru 18″ | ±1.6mm | |
| 20″ and larger | +3.2mm, -1.6mm | |
| Outside Diameter of hub | 5″ and smaller | +2.4mm, -0.8mm﹡ |
| 6″ and larger | +4.0mm, -0.8mm | |
| Diameter of contact face | 1/16″ rasied face tongue and groove male, female | ±0.8mm |
| 1/4″ rasied face tongue and groove male, female | ±0.4mm | |
| Diameter of hub at base | when hub base is 24″ or smaller | ±1.6mm﹡ |
| Diameter of hub at point of welding | 5″ and smaller | +2.4mm, -0.8mm |
| 6″ and larger | +4.0mm, -0.8mm | |
| Drilling | Bolt circle | ±1.6mm |
| Bolt hole spacing | ±0.8mm | |
| Eccentricity of bolt circle with respect to facing | 2 1/2″ and smaller: 0.8mm, max﹡ | |
| Eccentricity of bolt circle with respect to bore | 3″ and larger: 1.6mm, max﹡ | |
| Thickness | 18″ and smaller | +3.2mm, -0mm |
| 20″ and larger | +4.8mm, -0mm | |
| Length of thru hub | 10″ and smaller | ±1.6mm |
| 12″ and larger | ±3.2mm |
Class 150 Copper Alloy 70/30 Flanges Dimensions
Dimensions of Cast Copper Alloy Pipe Threaded Flanges – Class 150 to ASME B16.24. Dimensions indicated are in inches. Thickness of Blind Flange is same as thickness ‘T’ indicated in table below.
| Pipe Size (in) |
OD of Flange (in) |
Thk of Flange T (in) |
Overall Length Th (in) |
Dia of Hub H (in) |
Dia of Bolt Circle BCD (in) |
No. of Bolts |
Dia of Bolts (in) |
Stud Bolt Length (in) |
|---|---|---|---|---|---|---|---|---|
| 1/2 | 3-1/2 | 5/16 | 19/32 | 1-3/16 | 2-3/8 | 4 | 1/2 | 1-7/8 |
| 3/4 | 3-7/8 | 11/32 | 5/8 | 1-1/4 | 2-3/4 | 4 | 1/2 | 1-7/8 |
| 1 | 4-1/4 | 3/8 | 11/16 | 1-15/16 | 3-1/8 | 4 | 1/2 | 2 |
| 1-1/4 | 4-5/8 | 13/32 | 13/16 | 2-5/16 | 3-1/2 | 4 | 1/2 | 2 |
| 1-1/2 | 5 | 7/16 | 7/8 | 2-9/16 | 3-7/8 | 4 | 1/2 | 2-1/8 |
| 2 | 6 | 1/2 | 1 | 3-1/16 | 4-3/4 | 4 | 3/4 | 2-1/2 |
| 2-1/2 | 7 | 9/16 | 1-1/8 | 3-9/16 | 5-1/2 | 4 | 3/4 | 2-5/8 |
| 3 | 7-1/2 | 5/8 | 1-3/16 | 4-1/4 | 6 | 4 | 3/4 | 2-3/4 |
| 3-1/2 | 8-1/2 | 11/16 | 1-1/4 | 4-13/16 | 7 | 8 | 3/4 | 2-7/8 |
| 4 | 9 | 11/16 | 1-5/16 | 5-5/16 | 7-1/2 | 8 | 3/4 | 2-7/8 |
| 5 | 10 | 3/4 | 1-7/16 | 6-7/16 | 8-1/2 | 8 | 3/4 | 3-1/4 |
| 6 | 11 | 13/16 | 1-9/16 | 7-9/16 | 9-1/2 | 8 | 3/4 | 3-3/8 |
| 8 | 13-1/2 | 15/16 | 1-3/4 | 9-11/16 | 11-3/4 | 8 | 3/4 | 3-5/8 |
| 10 | 16 | 1 | 1-15/16 | 12 | 14-1/4 | 12 | 7/8 | 4-1/8 |
| 12 | 19 | 1-1/16 | 2-3/16 | 14-3/8 | 17 | 12 | 7/8 | 4-1/4 |
Class 300 Copper Alloy 70/30 Flanges Dimensions
Dimensions of Cast Copper Alloy Pipe Threaded Flanges – Class 300 to ASME B16.24. Dimensions indicated are in inches. Thickness of Blind Flange is same as thickness ‘T’ indicated in table below.
| Pipe Size (in) |
OD of Flange (in) |
Thk of Flange T (in) |
Overall Length Th (in) |
Dia of Hub H (in) |
Dia of Bolt Circle BCD (in) |
No. of Bolts |
Dia of Bolts (in) |
Stud Bolt Length (in) |
|---|---|---|---|---|---|---|---|---|
| 1/2 | 3-3/4 | 1/2 | 19/32 | 1-3/16 | 2-5/8 | 4 | 1/2 | 2-1/4 |
| 3/4 | 4-5/8 | 17/32 | 5/8 | 1-1/2 | 3-1/4 | 4 | 5/8 | 2-1/2 |
| 1 | 4-7/8 | 19/32 | 11/16 | 1-15/16 | 3-1/2 | 4 | 5/8 | 2-5/8 |
| 1-1/4 | 5-1/4 | 5/8 | 13/16 | 2-5/16 | 3-7/8 | 4 | 5/8 | 2-3/4 |
| 1-1/2 | 6-1/8 | 11/16 | 7/8 | 2-9/16 | 4-1/2 | 4 | 3/4 | 3-1/8 |
| 2 | 6-1/2 | 3/4 | 1 | 3-1/16 | 5 | 4 | 3/4 | 3 |
| 2-1/2 | 7-1/2 | 13/16 | 1-1/8 | 3-9/16 | 5-7/8 | 8 | 3/4 | 3-3/5 |
| 3 | 8-1/4 | 29/32 | 1-3/16 | 4-1/4 | 6-5/8 | 8 | 3/4 | 3-1/2 |
| 3-1/2 | 9 | 31/32 | 1-1/4 | 4-13/16 | 7-1/4 | 8 | 3/4 | 3-5/8 |
| 4 | 10 | 1-1/16 | 1-5/16 | 5-5/16 | 7-7/8 | 8 | 3/4 | 3-7/8 |
| 5 | 11 | 1-1/8 | 1-7/16 | 6-7/16 | 9-1/4 | 8 | 3/4 | 4 |
| 6 | 12-1/2 | 1-3/16 | 1-9/16 | 7-9/16 | 10-5/8 | 12 | 3/4 | 4-1/8 |
| 8 | 15 | 1-3/8 | 1-3/4 | 9-11/16 | 13 | 12 | 7/8 | 4-3/4 |
In Stock ASTM B151 Copper Nickel 70/30 Flanges Types
ASTM B151 Copper Nickel 70/30 Flanges Price in India
- Copper Nickel 70/30 Weld Neck Flange
- Copper Nickel 70/30 Long Weld Neck Flange
- Copper Nickel 70/30 Slip On Flange
- Copper Nickel 70/30 Spectacle Blind Flanges
- Copper Nickel 70/30 Socket Weld Flanges
- Copper Nickel 70/30 Blind Flange
- Copper Nickel 70/30 Threaded Flanges
- Copper Nickel 70/30 Orifice Flanges
- Copper Nickel 70/30 Lap Joint Flanges
- Copper Nickel 70/30 Square Flanges
- Copper Nickel 70/30 Ring Type Joint Flanges
- Copper Nickel 70/30 Tongue and Groove Flange
- Copper Nickel 70/30 Expander Flanges
- Copper Nickel 70/30 Reducing Flanges
- Copper Nickel 70/30 Male & Female Flanges
- Copper Nickel 70/30 Weldolet Flange
- Copper Nickel 70/30 Nipolet Flange
- Copper Nickel 70/30 Backing Ring Flanges
- Copper Nickel 70/30 Ring Spacer Flanges
- Copper Nickel 70/30 Paddle Blind Flanges
- Copper Nickel 70/30 Plate Flange
- Copper Nickel 70/30 High Hub Blind Flange
- Copper Nickel 70/30 Custom Flanges
- Copper Nickel 70/30 Swivel Ring Flange
Note: Flanges Prices are depended on Material Grades, Standards, Dimensions, Sizes, Order Quantity, etc. Prices Mentioned on website are for referance purpose only. To get market leading prices for Cupro Nickel 70/30 Flanges contact us now.
How To Order Copper Nickel 70/30 Flanges?
Parameters to request estimates
- Flange type (welding neck, slip-on, threaded, lap joint flange, etc)
- Grade 70/30 Copper Nickel Flange specification (example ASME B16.5, ASME B16.47 type A, EN 1092-1, JIS, UNI, DIN, etc.)
- Nominal pipe size (NPS)
- Cupro Nickel 70/30 Flange rating (or class): flanges’ rating can range from 150 to 2500 for ASME flanges, from 5k to 30k for JIS B2220 flanges and KS1503 flanges; from PN 6 to PN 100 for European and Russian-standard flanges (DIN, UNI, EN 1092-1, GOST 12820 / 12821-80); Class 600/3, 1000/3, 1600/3, 2500/3, 4000/3 for SANS/SABS flanges (South African standard for flanges)
- Pipe schedule (for welding neck and socket weld flanges)
- Copper Nickel 70/30 Flange facing type (FF; RF, RTJ): according to ASME B16.5, the raised face is the standard facing for flanges (different facings, like RTJ or flat face FF, have to be ordered specifically)
- Cupro Nickel 70/30 Flange surface finish (smooth, stock, concentric serrated, etc)
- Copper Nickel 70/30 Flange Quantity
ASTM B151 Copper Nickel 70/30 Flanges Industries and Applications
ASTM B151 Cupro Nickel 70/30 Flange Applications
- Pumps, Valves, and vessels in manufacturing and food processing.
- Pipe connections in industrial waterworks.
- Heat exchangers and heating systems of all sizes.
- Mining support.
- Nuclear power systems.
- Plumbing and mechanical systems.
- Assemblies in the oil, gas, and petrochemical industries.
- Fire protection systems.
Copper Nickel 70/30 Flange Supply and Export Network
List of Cities and Countries
| Afghanistan | Algeria | Angola | Argentina |
| Australia | Austria | Azerbaijan | Bahrain |
| Bangladesh | Belarus | Belgium | Bhutan |
| Bolivia | Brazil | Bulgaria | Canada |
| Chile | China | Colombia | Costa Rica |
| Croatia | Czech Republic | Aberdeen | Abu Dhabi |
| Ahmedabad | Ahvaz | Al Jubail | Al Khobar |
| Algiers | Ankara | Atyrau | Bangkok |
| Bengaluru | Bhopal | Bogota | Brisbane |
| Busan | Cairo | Calgary | Caracas |
| Chandigarh | Chennai | Chiyoda | Coimbatore |
| Colombo | Courbevoie |
| Denmark | Ecuador | Egypt | Estonia |
| Finland | France | Gabon | Ghana |
| Greece | Hong Kong | Hungary | India |
| Indonesia | Iran | Iraq | Israel |
| Italy | Japan | Jordan | Dallas |
| Dammam | Doha | Dubai | Edmonton |
| Ernakulam | Faridabad | Geoje-si | Gimhae-si |
| Granada | Gurgaon | Hanoi | Haryana |
| Ho Chi Minh City | Hong Kong | Houston | Howrah |
| Hyderabad | Indore | Istanbul | Jakarta |
| Jeddah |
| Kazakhstan | Kenya | Kuwait | Lebanon |
| Libya | Lithuania | Malaysia | Mexico |
| Mongolia | Morocco | Netherlands | New Zealand |
| Nigeria | Norway | Oman | Pakistan |
| Peru | Philippines | Poland | Portugal |
| Qatar | Romania | Russia | Karachi |
| Kolkata | Kuala Lumpur | Kuwait City | La Victoria |
| Lagos | Lahore | London | Los Angeles |
| Ludhiana | Madrid | Manama | Melbourne |
| Mexico City | Milan | Montreal | Moscow |
| Mumbai | Muscat | Navi Mumbai | New Delhi |
| New York | Noida | Perth | Petaling Jaya |
| Pimpri-Chinchwad | Port-of-Spain | Pune | Rajkot |
| Rio de Janeiro | Riyadh |
| Saudi Arabia | Serbia | Singapore | Slovakia |
| South Africa | South Korea | Spain | Sri Lanka |
| Sweden | Switzerland | Taiwan | Thailand |
| Trinidad & Tobago | Tunisia | Turkey | Ukraine |
| United Arab Emirates (UAE) | United Kingdom (UK) | United States (US) | Venezuela |
| Vietnam | Yemen | Santiago | Secunderabad |
| Seoul | Sharjah | Singapore | Surat |
| Sydney | Tehran | Thane | Thiruvananthapuram |
| Toronto | Ulsan | Vadodara | Visakhapatnam |
| Vung Tau |