Site icon Marcel Piping Projects Supply PVT. LTD.

Threaded Flanges Manufacturer

Specialized Threaded Flanges Manufacturer, ASME B16.47 / ANSI B16.5 Screwed Flange Dimensions, THRF Flange.

Marcel Piping Projects Supply PVT LTD is a prime manufacturer, supplier, stockist, and exporter of ASME B16.5 Threaded Flange in India. The threaded Flange is connected to the pipe by deforming the Flange onto the pipe, without any welding, however, small welds are applied to increase the strength of the connection. Threaded flanges are available in sizes up to 4 elevation and multiple pressure ratings, yet, they’re generally used for pipes below 2 inches with wall density above schedule 80.

Threaded flanges are also an obligatory requirement in explosive areas, similar to gas stations and factories, as the prosecution of welded connections in similar surroundings would be dangerous. These ½” to 24” size, in 150#, 300#, 400#, 600#, 900#, 1500#, 2500# pressure class and can have Raised Face (RF), Flat Face (FF), and Ring Type Joint facing.

A Threaded Flange is not suitable for pipe systems with wall consistence, because the cutting thread on the pipe isn’t possible. Therefore, a thicker wall density must be chosen. ASME B 31.3 Pipeline Companion says Where pipe is threaded and used for service above 250 psi and for water service above 100 psi with water temperatures above 220 ° F, the pipe shall be flawless and have a consistence at least equal to schedule 80 of ASME B 36.10 Socket welding and threaded flanges aren’t recommended for service above 250 °C and below-45 C.

We are PED-approved exporters of ANSI / ASME B16.5 Threaded Flange RF & FF, EN 1092-1 Threaded Flange, Table D & Table E Galvanised Threaded Flange, JIS Threaded Flange, Threaded Lap Joint Flange, Large Male Threaded Flange, MS Threaded Flange, NPT Threaded Flange, NZ Threaded Flange, Threaded Orifice & Slip-on Flange, Class 150, Class 300, DIN 2566, DN40, PN16, PN10 Threaded Flanges in the USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya.

Threaded Flanges Manufacturer
Threaded Flanges Manufacturer in Mumbai, India
Threaded Flanges Supplier in Mumbai, India

We are ISO Certified Manufacturer and Stockist of Threaded Flanges in Stainless Steel, Carbon Steel, Mild Steel, Alloy Steel, Duplex Steel, Super Duplex Steel, Hastelloy, Monel, Copper Nickel, Inconel, Incoloy, Nickel Alloy, Alloy 20, 254 Smo, Titaniun, Bronze, Aluminium, Brass at Reasonable Price.

We are Leading Exporter and Supplier of ASME/ANSI B16.5, ASME/ANSI B16.47 Threaded Flange, Series A & B THRF Flange, Class 150 Screwed Raised Face Flange, EN 1092-1 Threaded Flat Face Flange, MSS SP-44 Galvanised Threaded Flange, NPT Threaded Flange, JIS Threaded Flange RTJ, PN10 PN16 Threaded Flange, Threaded Flange Class 300#, 600#, 900#, 1500# Dimensions.

Threaded Flange Standard Specifications
Screwed Flange Specification Chart

Product Name Threaded Flanges | Screwed Flange | THRF Flange
Size Range 1/2″ (15 NB) to 48″ (1200NB)
Class / Pressure Rating 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standards / Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605
Flange Face Types / Connection Type Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G)
Dimensions ANSI B16.5, ANSI B16.47 Series A & B, ASA, API-605, MSS SP44, AWWA, Custom Drawings
Custom Design As per your drawing | AS, BS, ANSI, DIN, JIS | Equal and Reducing Configurations
Material Test Certificates (MTC) As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103
Test Certificates 100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc
Tests Hydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector
Equipment / Machines Press machine, Pushing Machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc.
Coating Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Origin Indian / USA / Japan / West Europe / Korean
Applications/Usage Offshore, Oil Field, Shipbuilding, Water System, Natural Gas, Pipe Projects, Electric Power, etc.
Top Export Network USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya.

Threaded Flange Material Grades
Threaded Flange Material Standard

Stainless Steel Threaded Flange ASTM/ASME A/SA182:- F304, F304L, F316, F316L, ASTM/ASME A/SA351:- CF3, CF3M, CF8, CF8M, DIN 1.4306, DIN 1.4301, DIN 1.4404, DIN 1.4401, DIN 1.4408, DIN 1.4308, DIN 1.4306, DIN 1.4409
Duplex Threaded Flange S31803 / S32205 A182:- Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Threaded Flange S32750 / S32760 A182:- Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Copper Nickel Threaded Flange ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Titanium Threaded Flange ASTM B381 / ASME SB381:- Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
ASTM  R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 | R56400/GR.5
Copper Threaded Flange TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000, C12200, C12300, T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910, C10920, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Incoloy Threaded Flange ASTM B564 / ASME SB564:- Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925
Inconel Threaded Flange ASTM B564 / ASME SB564:- Inconel 600, 601, 625, 718, 783, 690, x750
Nickel Threaded Flange ASTM B564 / ASME SB564:- Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Hastelloy Threaded Flange ASTM B564 / ASME SB564:- Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X
Monel Threaded Flange ASTM B564 / ASME SB564:- Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Carbon Steel Threaded Flange ASTM/ASME A/SA105 A/SA105N and A/SA216-WCB, DIN 1.0460, DIN 1.0402, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, CS High Yield ASTM A694 / A694 (F52, F56, F60, F65, F70, F80)
Alloy Steel Threaded Flange ASTM A182 / ASME SA182:- F5, F9, F11, F12, F22, F91
Alloy 20 Threaded Flange ASTM B462 / ASME SB462:- Carpenter® 20 Alloy, Alloy 20Cb-3
254 SMO Threaded Flange ASTM A182 / ASME SA182:- SMO 254/6Mo, UNS S31254, DIN 1.4547
Aluminium Threaded Flange 5052 /6061/ 6063 / 2017 / 7075 / etc.
Brass Threaded Flange 3602 / 2604 / H59 / H62 / etc.
Other Threaded Flange material Tin bronze, Alumunum bronze, Lead bronze, Nimonic 75, Nimonic 80A, Nimonic 90, AISI 4140, AISI 4130, Mild Steel, Al6XN Flanges

Threaded Flange Standards
Threaded Flange Standard Dimensions

Threaded Flange Class 150 Dimensions
ANSI B16.5 Pressure Rating Class 150

DRILLING
NOMINAL BORE DIA.
(D)
THICK.
(E)
DIA.
(F)
DIA.
(B)
HEIGHT1
(H)
NBR HOLES DIA.
(C)
1/2″ 90 9.6 35.05 30 14 4 15.87 60.3
3/4″ 100 11.2 42.92 38 14 4 15.87 69.9
1″ 110 12.7 50.80 49 16 4 15.87 79.4
1 1/4″ 115 14.3 63.50 59 19 4 15.87 88.9
1 1/2″ 125 15.9 73.15 65 21 4 15.87 98.4
2″ 150 17.5 91.94 78 24 4 19.05 120.7
2 1/2″ 180 20.7 104.65 90 27 4 19.05 139.7
3″ 190 22.3 127.00 108 29 4 19.05 152.4
3 1/2″ 215 22.3 139.70 122 30 8 19.05 177.8
4″ 230 22.3 157.22 135 32 8 19.05 190.5
5″ 255 22.3 185.67 164 35 8 22.22 215.9
6″ 280 23.9 215.90 192 38 8 22.22 241.3
8″ 345 27.0 269.75 246 43 8 22.22 298.5
10″ 405 28.6 323.85 305 48 12 25.40 362.0
12″ 485 30.2 381.00 365 54 12 25.40 431.8
14″ 535 33.4 412.75 400 56 12 28.57 476.3
16″ 595 35.0 469.90 457 62 16 28.57 539.8
18″ 635 38.1 533.40 505 67 16 31.75 577.9
20″ 700 41.3 584.20 559 71 20 31.75 635.0
24″ 815 46.1 692.15 663 81 20 34.92 749.3

NOTE: 1,6mm raised face not included in the E and H dimensions

Threaded Flange Class 300 Dimensions
ANSI B16.5 Pressure Rating Class 300

DRILLING
NOMINAL BORE DIA.
(D)
THICK.
(E)
DIA.
(F)
DIA.
(B)
DIA.
(A)
HEIGHT1
(H)
NBR HOLES DIA.
(C)
1/2″ 95 12.7 35.05 38 23.6 21 4 15.87 66.7
3/4″ 115 14.3 42.92 48 29.0 24 4 19.05 82.6
1″ 125 15.9 50.80 54 35.8 25 4 19.05 88.9
1 1/4″ 135 17.5 63.50 64 44.4 25 4 19.05 98.4
1 1/2″ 155 19.1 73.15 70 50.3 29 8 22.22 114.3
2″ 165 20.7 91.94 84 63.5 32 8 19.05 127.0
2 1/2″ 190 23.9 104.65 100 76.2 37 8 22.22 149.2
3″ 210 27.0 127.00 117 92.2 41 8 22.22 168.3
3 1/2″ 230 28.6 139.70 133 104.9 43 8 22.22 184.2
4″ 255 30.2 157.22 146 117.6 46 8 22.22 200.0
5″ 280 33.4 185.67 178 144.4 49 8 22.22 235.0
6″ 320 35.0 215.90 206 171.4 51 12 22.22 269.9
8″ 380 39.7 269.75 260 222.2 60 12 25.40 330.2
10″ 445 46.1 323.85 321 276.2 65 16 28.57 387.4
12″ 520 49.3 381.00 375 328.6 71 16 31.75 450.8
14″ 585 52.4 412.75 425 360.4 75 20 31.75 514.4
16″ 650 55.6 469.90 483 411.2 81 20 34.92 571.5
18″ 710 58.8 533.40 533 462.0 87 24 34.92 628.6
20″ 775 62.0 584.20 587 512.8 94 24 34.92 685.8
24″ 915 68.3 692.15 702 614.4 105 24 41.27 812.8

NOTE: 1,6mm raised face not included in the E and H dimensions

Threaded Flange Class 600 Dimensions
ANSI B16.5 Pressure Rating Class 600

DRILLING
NOMINAL BORE DIA.
(D)
THICK.
(E)
DIA.
(F)
DIA.
(B)
DIA.
(A)
HEIGHT1
(H)
NBR HOLES DIA.
(C)
1/2″ 95 14.3 35.05 38 23.6 22 4 15.87 66.7
3/4″ 115 15.9 42.92 48 29.0 25 4 19.05 82.6
1″ 125 17.5 50.80 54 35.8 27 4 19.05 88.9
1 1/4″ 135 20.7 63.50 64 44.4 29 4 19.05 98.4
1 1/2″ 155 22.3 73.15 70 50.6 32 4 22.22 114.3
2″ 165 25.4 91.94 84 63.5 37 8 19.05 127.0
2 1/2″ 190 28.6 104.65 100 76.2 41 8 22.22 149.2
3″ 210 31.8 127.00 117 92.2 46 8 22.22 168.3
3 1/2″ 230 35.0 139.70 133 104.9 49 8 25.40 184.2
4″ 275 38.1 157.22 152 117.6 54 8 25.40 215.9
5″ 330 44.5 185.67 189 144.4 60 8 28.57 266.7
6″ 355 47.7 215.90 222 171.4 67 12 31.75 292.1
8″ 420 55.6 269.75 273 222.2 76 12 31.75 349.2
10″ 510 63.5 323.85 343 276.2 86 16 34.92 431.8
12″ 560 66.7 381.00 400 328.6 92 20 34.92 489.0
14″ 605 69.9 412.75 432 360.4 94 20 38.10 527.0
16″ 685 76.2 469.90 495 411.2 106 20 41.27 603.2
18″ 745 82.6 533.40 546 462.0 117 20 44.45 654.0
20″ 815 88.9 584.20 610 512.8 127 24 44.45 723.9
24″ 940 101.6 692.15 718 614.4 140 24 47.62 838.2

NOTE: 1,6mm raised face not included in the E and H dimensions

In Stock Flange Types
Flanges Price in India

Weld Neck Flange
Long Weld Neck Flange
Slip On Flange
Spectacle Blind Flanges
Socket Weld Flanges
Blind Flanges / Dummy Flange
Screwed / Threaded Flanges
Orifice Flanges
Lap Joint Flanges
ANSI B16.5 Square Flanges
Ring Type Joint Flanges
Tongue and Groove Flange
Expander Flanges
Reducing Flanges
ASME B16.5 Male & Female Flanges
Weldolet Flange
Nipolet Flange
Backing Ring Flanges
Ring Spacer Flanges
Paddle Blind Flanges
Plate Flange
High Hub Blind Flange
Custom Flanges
Swivel Ring Flange

Note: Flanges Prices are depended on Material Grades, Standards, Dimensions, Sizes, Order Quantity, etc. Prices Mentioned on website are for referance purpose only. To get market leading prices for Threaded Flange contact us now.

How To Order Threaded Flanges?
Parameters to request estimates

  • Threaded Flange specification (example ASME B16.5, ASME B16.47 type A, EN 1092-1, JIS, UNI, DIN, etc.)
  • Nominal pipe size (NPS)
  • Threaded Flange rating (or class): flanges’ rating can range from 150 to 2500 for ASME flanges, from 5k to 30k for JIS B2220 flanges and KS1503 flanges; from PN 6 to PN 100 for European and Russian-standard flanges (DIN, UNI, EN 1092-1, GOST 12820 / 12821-80); Class 600/3, 1000/3, 1600/3, 2500/3, 4000/3 for SANS/SABS flanges (South African standard for flanges)
  • Threaded Flange facing type (FF; RF, RTJ): according to ASME B16.5, the raised face is the standard facing for flanges (different facings, like RTJ or flat face FF, have to be ordered specifically)
  • Threaded Flange surface finish (smooth, stock, concentric serrated, etc)
  • Material grade (forged carbon, stainless, duplex, nickel-alloy steels or, non-ferrous materials as cupronickel, copper, aluminum, and bronze)
  • Threaded Flange Quantity

Threaded Flange Industries and Applications
Threaded Flange Applications

  • Pumps, Valves, and vessels in manufacturing and food processing.
  • Pipe connections in industrial waterworks.
  • Heat exchangers and heating systems of all sizes.
  • Mining support.
  • Nuclear power systems.
  • Plumbing and mechanical systems.
  • Assemblies in the oil, gas, and petrochemical industries.
  • Fire protection systems.

Threaded Flange Supply and Export Network
List of Cities and Countries







Afghanistan Algeria Angola Argentina
Australia Austria Azerbaijan Bahrain
Bangladesh Belarus Belgium Bhutan
Bolivia Brazil Bulgaria Canada
Chile China Colombia Costa Rica
Croatia Czech Republic Aberdeen Abu Dhabi
Ahmedabad Ahvaz Al Jubail Al Khobar
Algiers Ankara Atyrau Bangkok
Bengaluru Bhopal Bogota Brisbane
Busan Cairo Calgary Caracas
Chandigarh Chennai Chiyoda Coimbatore
Colombo Courbevoie
Denmark Ecuador Egypt Estonia
Finland France Gabon Ghana
Greece Hong Kong Hungary India
Indonesia Iran Iraq Israel
Italy Japan Jordan Dallas
Dammam Doha Dubai Edmonton
Ernakulam Faridabad Geoje-si Gimhae-si
Granada Gurgaon Hanoi Haryana
Ho Chi Minh City Hong Kong Houston Howrah
Hyderabad Indore Istanbul Jakarta
Jeddah
Kazakhstan Kenya Kuwait Lebanon
Libya Lithuania Malaysia Mexico
Mongolia Morocco Netherlands New Zealand
Nigeria Norway Oman Pakistan
Peru Philippines Poland Portugal
Qatar Romania Russia Karachi
Kolkata Kuala Lumpur Kuwait City La Victoria
Lagos Lahore London Los Angeles
Ludhiana Madrid Manama Melbourne
Mexico City Milan Montreal Moscow
Mumbai Muscat Navi Mumbai New Delhi
New York Noida Perth Petaling Jaya
Pimpri-Chinchwad Port-of-Spain Pune Rajkot
Rio de Janeiro Riyadh
Saudi Arabia Serbia Singapore Slovakia
South Africa South Korea Spain Sri Lanka
Sweden Switzerland Taiwan Thailand
Trinidad & Tobago Tunisia Turkey Ukraine
United Arab Emirates (UAE) United Kingdom (UK) United States (US) Venezuela
Vietnam Yemen Santiago Secunderabad
Seoul Sharjah Singapore Surat
Sydney Tehran Thane Thiruvananthapuram
Toronto Ulsan Vadodara Visakhapatnam
Vung Tau
Exit mobile version