Marcel Piping Projects offers a wide range of Monel 400 Flanges, where these products is being offered by us are manufactured using high quality essence. Monel 400 Slip On Flanges is a solid result alloy that can only be hardened by cold working. Welding ways including gas โ arc welding, essence โ arc welding, gas โ essence โ bow welding and submerged โ bow welding are recommended on these Monel 400 Threaded Flanges. Monel 400 Blind Flanges are illustrated by resistance to attack by acid, as well as their high mechanical strengths, and good rigidity. Meanwhile, Alloy 400 Flanges are also being offered in various shapes, and sizes to our Clients. A completely ultramodern amalgamation, these Monel 400 Socket Weld Flanges, is a high performance alloy that benefits greatly from double melting through the Electro Slag Refining (ESR) process. Electro Slag Refining process ensure cleanest, and topmost quality of Monel 400 RTJ Flanges are supplied. There’s no need for post weld heat treatments in Monel 400 Blind Flanges. Still, thorough cleaning after welding is critical for optimum erosion resistance in Monel 400 Nippolet Flanges, or differently there’s the threat of impurity and embitterment.
We are leading Stockists and Suppliers of ASTM B564 Monel Alloy 400 Flanges in USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya.
Monel 400 Flanges Manufacturer in Mumbai, India
Monel 400 Flanges Supplier in Mumbai, India
We are ISO Certified Manufacturer and Stockist of ASME SB564 Monel 400 Flange ANSI 150, Table D & Table E Monel 400 Flange, Series A & B Monel 400 Blind Flange, ASTM B564 Monel 400 Lap Joint Flange, JIS Monel 400 Ring Type Joint Flange, PN10 PN16 Monel 400 Orifice Flange Pressure Rating, Monel 400 Threaded Flange at Reasonable Price.
Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G)
Dimensions
ANSI B16.5, ANSI B16.47 Series A & B, ASA, API-605, MSS SP44, AWWA, Custom Drawings
Custom Design
As per your drawing | AS, BS, ANSI, DIN, JIS | Equal and Reducing Configurations
Material Test Certificates (MTC)
As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103
Test Certificates
100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc
Monel Alloy 400 Flange Weight Chart
Flange Weights By Pressure Class And Size
Weights are in pounds and will vary by different wall thicknesses. 1 inch = 25.44 mm. 1 mm = 0.03937 inches, 1 lb/ft^2 = 47.88 Pa, 1 psi = 6.8948 Pa, xยฐF = (5/9)(x-32)ยฐC, 1 pound = 0.45359 Kg, 1 Kg = 2.20462 pounds, 1 Pa = 0.020885 lb/ft^2, 1 Pa = 0.00014504 psi, xยฐC = (9/5)x + 32ยฐF.
Flange Weights by Pressure Class and Size
Pipe Size
150 #
300 #
600 #
900 #
1500 #
2500 #
WN
SO
BLD
WN
SO
BLD
WN
SO
BLD
WN
SO
BLD
WN
SO
BLD
WN
SO
BLD
1/2โณ
2
1
1
2
1
1
2
2
2
SEE 1500 # WEIGHTS
5
4
4
7
7
7
3/4โณ
2
2
2
3
3
3
4
3
3
SEE 1500 # WEIGHTS
6
5
6
8
8
8
1โณ
3
2
2
4
3
3
4
4
4
SEE 1500 # WEIGHTS
9
8
8
12
11
11
1 1/2โณ
4
3
3
7
6
6
8
7
8
SEE 1500 # WEIGHTS
13
12
13
25
22
23
2โณ
6
5
5
9
7
8
12
9
10
SEE 1500 # WEIGHTS
25
25
25
42
37
39
2 1/2โณ
8
7
7
12
10
12
18
13
15
SEE 1500 # WEIGHTS
36
36
35
52
55
56
3โณ
10
8
9
15
13
16
23
16
20
31
26
29
48
48
48
94
83
86
4โณ
15
13
17
25
22
27
42
37
41
53
53
54
73
73
73
145
125
130
5โณ
19
15
20
32
28
35
68
63
68
86
83
87
130
130
140
245
210
225
6โณ
24
19
26
42
39
50
81
80
86
110
110
115
165
165
160
380
325
345
8โณ
39
30
45
67
58
81
120
115
140
175
170
200
275
260
300
580
485
530
10โณ
52
43
70
91
81
124
190
170
230
260
245
290
455
435
510
1075
930
1025
12โณ
80
64
110
140
115
185
225
200
295
325
325
415
690
580
690
1525
1100
1300
14โณ
110
90
140
180
165
250
280
230
355
400
400
520
940
NA
975
NA
NA
NA
16โณ
140
98
180
250
190
295
390
330
495
495
425
600
1250
NA
1300
NA
NA
NA
18โณ
150
130
220
320
250
395
475
400
630
680
600
850
1625
NA
1750
NA
NA
NA
20โณ
180
165
285
400
315
505
590
510
810
830
730
1075
2050
NA
2225
NA
NA
NA
22โณ
225
185
355
465
370
640
720
590
1000
NA
NA
NA
NA
NA
NA
NA
NA
NA
24โณ
260
220
430
580
475
790
830
730
1250
1500
1400
2025
3325
NA
3625
NA
NA
NA
Monel 400 API and ASME/ANSI Flanges
Flange Dimensions and Pressure Ratings Comparing
ASME ANSI vs. API flanges with the same dimensions
Flange
Pressure Class Rating
(psi)
Nominal Size Range
(inches)
ASME/ANSI B16.5
API 6A
ASME/ANSI B16.5
API 6A1)
Weld neck
600
2000
1/2 – 24
113/16ย – 11
900
3000
1500
5000
Blind and Threaded
600
2000
113/16ย – 211/4
900
3000
113/16ย – 203/4
1500
5000
113/16ย – 11
In the old API standard, flanges ranged from 1 1/2 to 10(20) inches. 1 inch = 25.4 mm
Monel 400 Flange Dimensional Tolerances
Tolerance of Welding Neck Flanges
Outside Diameter
When O.D. is 24″ or less
ย ยฑ1.6mm๏นก
Inside Diameter
10″ and smaller
ย ยฑ0.8mm
12″ thru 18″
ย ยฑ1.6mm
20″ and larger
ย +3.2mm, -1.6mm
Outside Diameter of hub
5″ and smaller
ย +2.4mm, -0.8mm๏นก
6″ and larger
ย +4.0mm, -0.8mm
Diameter of contact face
1/16″ rasied face tongue and groove male, female
ย ยฑ0.8mm
1/4″ rasied face tongue and groove male, female
ย ยฑ0.4mm
Diameter of hub at base
when hub base is 24″ or smaller
ย ยฑ1.6mm๏นก
Diameter of hub at point of welding
5″ and smaller
ย +2.4mm, -0.8mm
6″ and larger
ย +4.0mm, -0.8mm
Drilling
Bolt circle
ย ยฑ1.6mm
Bolt hole spacing
ย ยฑ0.8mm
Eccentricity of bolt circle with respect to facing
2 1/2″ and smaller: 0.8mm, max๏นก
Eccentricity of bolt circle with respect to bore
3″ and larger: 1.6mm, max๏นก
Thickness
18″ and smaller
ย +3.2mm, -0mm
20″ and larger
ย +4.8mm, -0mm
Length of thru hub
10″ and smaller
ย ยฑ1.6mm
12″ and larger
ย ยฑ3.2mm
Monel 400 Flange Pressure Rating
Monel 400 Pressure-Temperature Ratings: ISO Unit
Temp. ยฐC
Class 150
Class 300
Class 400
Class 600
Class 900
Class 1500
Class 2500
-29~38
15.9
41.4
55.2
82.7
124.1
206.8
344.7
50
15.4
40.2
53.7
80.5
120.7
201.2
335.3
100
13.8
35.9
47.9
71.9
107.8
179.7
299.5
150
12.9
33.7
45.0
67.5
101.2
168.7
281.1
200
12.5
32.7
43.6
65.4
98.1
163.5
272.4
250
12.1
32.6
43.5
65.2
97.8
163.0
271.7
300
10.2
32.6
43.5
65.2
97.8
163.0
271.7
325
9.3
32.6
43.5
65.2
97.8
163.0
271.7
350
8.4
32.6
43.4
65.1
97.7
162.8
271.3
375
7.4
32.4
43.2
64.8
97.2
161.9
269.9
400
6.5
32.1
42.8
64.2
96.2
160.4
267.4
425
5.5
31.6
42.2
63.3
94.9
158.2
263.6
450
4.6
26.9
35.9
53.8
80.7
134.5
224.2
475
3.7
20.8
27.7
41.5
62.3
103.8
173.0
Monel 400 Pressure-Temperature Ratings: US Customary Unit
Temp. ยฐF
Class 150
Class 300
Class 400
Class 600
Class 900
Class 1500
Class 2500
-20~100
230
600
800
1200
1800
3000
5000
200
200
525
700
1050
1575
2630
4380
300
190
490
655
980
1470
2450
4080
400
180
475
630
945
1420
2365
3940
500
170
475
630
945
1420
2365
3940
600
140
475
630
945
1420
2365
3940
650
125
475
630
945
1420
2365
3940
700
110
470
625
940
1410
2350
3920
750
95
465
620
930
1395
2330
3880
800
80
460
610
915
1375
2290
3820
850
65
375
505
755
1130
1885
3145
900
50
275
365
550
825
1370
2285
In Stock ASTM B564 Monel 400 Flanges Types
ASTM B564 Monel 400 Flanges Price in India
Note: Flanges Prices are depended on Material Grades, Standards, Dimensions, Sizes, Order Quantity, etc. Prices Mentioned on website are for referance purpose only. To get market leading prices for Monel 400 Flanges contact us now.
How To Order Monel 400 Flanges?
Parameters to request estimates
Flange type (welding neck, slip-on, threaded, lap joint flange, etc)
Grade 400 Monel Flange specification (example ASME B16.5, ASME B16.47 type A, EN 1092-1, JIS, UNI, DIN, etc.)
Nominal pipe sizeย (NPS)
Monel Alloy 400 Flange ratingย (or class): flangesโ rating can range fromย 150 to 2500 for ASME flanges, from 5k to 30k forย JIS B2220 flanges and KS1503 flanges; from PN 6 to PN 100 for European and Russian-standard flanges (DIN, UNI, EN 1092-1, GOSTย 12820 / 12821-80);ย Class 600/3, 1000/3, 1600/3, 2500/3, 4000/3 for SANS/SABS flanges (South African standard for flanges)
Pipe schedule (for welding neck and socket weld flanges)
Monel 400 Flange facing type (FF; RF, RTJ):ย according to ASME B16.5, the raised face is the standard facing for flanges (different facings, like RTJ or flat face FF, have to be ordered specifically)
