Marcel Piping Projects Supply PVT LTD is a prime manufacturer, supplier, stockist, and exporter of ASME B16.5 Threaded Flange in India. The threaded Flange is connected to the pipe by deforming the Flange onto the pipe, without any welding, however, small welds are applied to increase the strength of the connection. Threaded flanges are available in sizes up to 4 elevation and multiple pressure ratings, yet, they’re generally used for pipes below 2 inches with wall density above schedule 80.
Threaded flanges are also an obligatory requirement in explosive areas, similar to gas stations and factories, as the prosecution of welded connections in similar surroundings would be dangerous. These ½” to 24” size, in 150#, 300#, 400#, 600#, 900#, 1500#, 2500# pressure class and can have Raised Face (RF), Flat Face (FF), and Ring Type Joint facing.
A Threaded Flange is not suitable for pipe systems with wall consistence, because the cutting thread on the pipe isn’t possible. Therefore, a thicker wall density must be chosen. ASME B 31.3 Pipeline Companion says Where pipe is threaded and used for service above 250 psi and for water service above 100 psi with water temperatures above 220 ° F, the pipe shall be flawless and have a consistence at least equal to schedule 80 of ASME B 36.10 Socket welding and threaded flanges aren’t recommended for service above 250 °C and below-45 C.
We are PED-approved exporters of ANSI / ASME B16.5 Threaded Flange RF & FF, EN 1092-1 Threaded Flange, Table D & Table E Galvanised Threaded Flange, JIS Threaded Flange, Threaded Lap Joint Flange, Large Male Threaded Flange, MS Threaded Flange, NPT Threaded Flange, NZ Threaded Flange, Threaded Orifice & Slip-on Flange, Class 150, Class 300, DIN 2566, DN40, PN16, PN10 Threaded Flanges in the USA, UK, Qatar, Mexico, Nigeria, Saudi Arabia, Kuwait, Iran, Kazakhstan, Bahrain, Vietnam, Indonesia, Norway, Ghana, Colombia, Azerbaijan, Libya.
Threaded Flanges Manufacturer in Mumbai, India
Threaded Flanges Supplier in Mumbai, India
We are ISO Certified Manufacturer and Stockist of Threaded Flanges in Stainless Steel, Carbon Steel, Mild Steel, Alloy Steel, Duplex Steel, Super Duplex Steel, Hastelloy, Monel, Copper Nickel, Inconel, Incoloy, Nickel Alloy, Alloy 20, 254 Smo, Titaniun, Bronze, Aluminium, Brass at Reasonable Price.
We are Leading Exporter and Supplier of ASME/ANSI B16.5, ASME/ANSI B16.47 Threaded Flange, Series A & B THRF Flange, Class 150 Screwed Raised Face Flange, EN 1092-1 Threaded Flat Face Flange, MSS SP-44 Galvanised Threaded Flange, NPT Threaded Flange, JIS Threaded Flange RTJ, PN10 PN16 Threaded Flange, Threaded Flange Class 300#, 600#, 900#, 1500# Dimensions.
Threaded Flange Standard Specifications
Screwed Flange Specification Chart
Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G)
Dimensions
ANSI B16.5, ANSI B16.47 Series A & B, ASA, API-605, MSS SP44, AWWA, Custom Drawings
Custom Design
As per your drawing | AS, BS, ANSI, DIN, JIS | Equal and Reducing Configurations
Material Test Certificates (MTC)
As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103
Test Certificates
100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc
ASTM/ASME A/SA182:- F304, F304L, F316, F316L, ASTM/ASME A/SA351:- CF3, CF3M, CF8, CF8M, DIN 1.4306, DIN 1.4301, DIN 1.4404, DIN 1.4401, DIN 1.4408, DIN 1.4308, DIN 1.4306, DIN 1.4409
Note: Flanges Prices are depended on Material Grades, Standards, Dimensions, Sizes, Order Quantity, etc. Prices Mentioned on website are for referance purpose only. To get market leading prices for Threaded Flange contact us now.
How To Order Threaded Flanges?
Parameters to request estimates
Threaded Flange specification (example ASME B16.5, ASME B16.47 type A, EN 1092-1, JIS, UNI, DIN, etc.)
Nominal pipe size (NPS)
Threaded Flange rating (or class): flanges’ rating can range from 150 to 2500 for ASME flanges, from 5k to 30k for JIS B2220 flanges and KS1503 flanges; from PN 6 to PN 100 for European and Russian-standard flanges (DIN, UNI, EN 1092-1, GOST 12820 / 12821-80); Class 600/3, 1000/3, 1600/3, 2500/3, 4000/3 for SANS/SABS flanges (South African standard for flanges)
Threaded Flange facing type (FF; RF, RTJ): according to ASME B16.5, the raised face is the standard facing for flanges (different facings, like RTJ or flat face FF, have to be ordered specifically)
